VALVES GROUND ON KWIK WAY SVS II 

 

valve job done on sERDI millennium 3.0

OPTIONS

stage 2+ CNC   $899 

1.9 INTAKE  1.610 EXHAUST

BRONZE GUIDES

.650 AV&V beehive springs

CC & mill to your specs

HEADS FLOW 290+ @28".

OUR BEST FLOWING HEAD FOR THIS VALVE SIZE & RETAINS STOCK SEATS.


STAGE 3 CNC   $999

2" INTAKE  1.575/1.610/1.630 EXHAUST

BRONZE GUIDES

.650 beehive springs

cc & mill to your specs

NEW INTAKE SEATS W/ 2" INTAKE VALVE WILL PUSH THESE HEADS OVER 300 CFM @ 28". FOR THE BIGGER MOTORS [113,117,124] THAT WANT TO KEEP THEIR STOCK PARTS FOR THAT 'SLEEPER' LOOK.

BEEHIVE SPRING UPGRADE   $99

COMPRESSION RELEASES INSTALLED   $125

BRONZE GUIDES   $75

CC & MILL   $75

SPRING SET UP  $50

EX VALVES  1.575/1.610/1.630  $50


TWIN CAM

 

I can upgrade your heads to 7mm valves & Beehive springs as used on late model TC's.

STAGE 1+  $499

1.9 INTAKE   STOCK EX  

BETTER FLOWING HEADS FOR BIG CAMS/ CUBES

EVO

110 HEADS CAN BE MADE TO FLOW 300+ CFM WITH YOUR STOCK PARTS.

AV&V 2.1 INTAKE & 1.650 EXHAUST VALVES ADD $99

AV&V BRONZE GUIDES $75  AV&V .650 BEEHIVE SPRINGS add $99

STAGE 1 $399

Your heads are ported & flow tested using your stock parts. Good performance upgrade for mild builds.

110 HEADS   $499


STAGE 1+ $499

Heads are ported & flow tested w/ 1.9 intake valve. Retains stock exhaust valves & springs

We recommend using HPI Throttle Body

with the CNC heads

STAGE 1   $399

HEADS ARE PORTED & FLOW TESTED USING YOUR STOCK PARTS


STAGE 2 CNC   $799

NEW 1.9 INTAKE & 1.575 EXHAUST VALVES

NEW BRONZE GUIDES

Heads are CNC ported for maximum flow. CNC porting corrects for manufacturing defects so every port is in the correct position every time. Improved flow & consistent from head to head.

These heads are for the customer that is keeping his stock TB